LEDACRAFT DS-25 25 INCH (635mm) DOUBLE DRUM SANDER
- 3hp Single phase main motor, driving both sanding drums.
- Small single phase DC variable speed feed motor of 1/8 hp.
- 635mm maximum working width x 127mm max. depth.
- Workpieces power fed through machine by conveyor belt below.
- Magnetic on/off switchbox with mushroom head stop switch.
- Table height setting by crank shaft handle on top of machine.
- Depth scale on left side to set height required.
- Lid on top lifts up to change abrasive papers.
- Adjustments for height on second sanding drum.
- Two 4” diameter dust exhaust outlets on top.
- Floor standing machine with enclosed base.
- All standard equipment as shown on machine leaflet.
Maximum working height 127 mm (5”)
Maximum sanding in one pass 1.5 mm
Speed of sanding drums 1600 rpm
Variable feed speed range 2 to 9 m/min
Diameter of sanding drums 127 mm (5”)
Nett weight of machine 180 kgs