LEDA SGJ-1300R-DP 1300mm SINGLE BELT LACQUER SANDER
LEDA MODEL SGJ1300R-DP SINGLE BELT WIDE BELT LACQUER SANDING MACHINE
- 1300mm maximum working width.
- 160mm maximum working height.
Sanding Belt Unit
- Large 185mm diameter, 30 shore rubber covered contact roller with variable speed by inverter – motor 20hp.
- Disc brake on sanding belt for quick stopping in emergency.
- Optronic (electric eye) control of sanding belt oscillation.
- Pneumatic tensioning of sanding belt with safety limit switch.
- Sanding belt cleaning air jet device oscillating side to side.
- Pressure shoes each side of contact roller to control top surface of panels.
- Sanding belt dimensions – 1330 x 1900mm
Buffing Roller Unit
- Large 300mm diameter, Scotch Brite style polishing roller.
- Manual fine adjustment of working height by handwheel.
- Rigid work table with 1/2hp electric rise and fall.
- Panel thickness measuring type table height setting device.
- Safety stop bar on front of work table.
- Fully variable feed speed – 6 to 30 metres/minute.
- Feed motor – 3hp driving speed variator.
- Automatic pneumatic feed belt tracking.
- Heavy steel construction of rigid machine body and frame.
- Electrical control panel on front of machine convenient to operator’s position.
- Overload protection on all motors.
- Inverter controlled variable speed drive on main sanding belt motor.
- Amp meter to check load on main sanding belt motor.
- Air regulator, oiler and filter unit fitted.
- Rotary bristle brush on rear to clean panel surface.
- Machine dimensions – 2425 x 2005 x 2270mm
- Machine weight – 2150kgs