HOLD MODEL 3800E SLIDING TABLE PANEL SAW with 3800mm maximum cutting stroke and 3-axis electronic control of machine settings using new generation touch screen

Specifications

• Heavy duty, high precision aluminium sliding table assembly, with excellent strength and rigidity.
• Smooth table movement - large diameter rollers running on hard chromed 19mm diameter steel bars.
• Heavy duty outrigger frame locks onto aluminium sliding table.
• Large section aluminium crosscut fence with precision work stops.
• Crosscut fence swivels around for angled cutting on outrigger frame.
• Swinging support arm below outrigger frame, to easily support heavy panels.
• Advanced design, incorporating three electronically controlled functions:-
  • Axis 1.  Rise and fall of main saw blade to pre-set height.
  • Axis 2.  Movement of rip fence to pre-set position.
  • Axis 3.  Tilting of saw blade assembly to required angle – after dialling in required degrees the machine sets itself automatically within 1/10º tolerance.
• Manual adjustment of scoring saw both vertically and horizontally.
• Heavy duty ripping fence mounted on large ball screw driven by a servo-motor.
• Overhead safety guard with see-through sides and dust exhaust outlet, all on heavy duty support frame.
• Overhead electrical touch screen control panel on second support arm.
• Machined cast iron main table supported by heavy gauge pressed steel machine body.  Table hinges up for service access.
• All sealed ball race bearings on saw blade arbors and under sliding table.
• One main saw blade and one scoring blade included.

Technical Data

• Length of sliding table                                                                       3800 mm
• Maximum saw blade diameter                                                              300 mm
• Diameter of scoring saw blade                                                             120 mm
• Saw blade assembly tilting                                                                  0º to 45º
• Maximum depth of cut @ 90º                                                                 80 mm
• Maximum depth of cut @ 45º                                                                 60 mm
• Main saw blade motor (three phase)                                                       7.5 hp
• Scoring saw blade motor (three phase)                                                   1.0 hp
• Maximum width of cut on rip fence                                                   1500 mm
• Nett weight of machine                                                                         950 kg