- 381mm (15”) maximum working width.
- 165mm (6.5”) maximum working height.
- Driven serrated steel infeed roller in front of cutterhead.
- Driven smooth outfeed roller behind cutterhead with rubber surface.
- Anti-kick back device at infeed position.
- Two idle rollers in ground cast iron work table, directly below two driven feed rollers above.
- Two support rollers on front of work table and two at rear.
- Handwheel rise and fall of top section of machine on four round threaded columns, driven by chain below work table.
- Locking knob to hold table at required height.
- Measurement scale and pointer to set table height.
- Dust extraction chute on rear of machine of 100mm diameter.
- Push button switch with protruding stop button.
- SPIRAL TCT CUTTERBLOCK $3,498 including GST
*Price includes GST. Freight or installation is excluded.
|Width of work table||381 mm|
|Length of working table||653 mm|
|Maximum depth of cut in one pass||3 mm|
|Minimum length of unbutted workpiece||170 mm|
|Two feed speeds by gear change||5 or 9 metres/min|
|Cutterhead diameter||75 mm|
|Rotation speed of cutterhead||5000 rpm|
|Cutterhead and feed drive motor||Single Phase 3hp|
|Nett weight of machine||210 kgs|